AMS Grow Guide

Chapter 10

Temperature, Humidity, and Ventilation

Growing potent cannabis plants incorporates mastering the art of having these inseparable factors - temperatures, humidity, and ventilation. However, some marijuana growers tend to overlook the latter two and focus on the former only. In this write-up, we are going to breakdown each of these down.


Cannabis plants tend to be choosy on the optimum room growth temperatures. Depending on the cannabis strains planted, the best temperature ranges at almost every phase of the cannabis life cycle need to range anywhere between 20°C and 30°C during the day.

During the night, cooler temperatures like 20°C or slightly lesser works incredibly.


But you may be wondering, “why do temperatures matter this high in these plants?” Well, cold temperatures tend to slow down cannabis plant growth. When they grow insanely low, the plants may as well end up withering. On the contrary, high temperatures may end up changing the potency levels and bud formation, especially in the flowering phase. The roots may as well end up rotting due to the increase in water transpiration in the soil. The main emphasis here is on ensuring that you keep the temperatures as optimal as possible. They should be relatively higher during the day and lower in the night. When you interchange between these two, you may end up having changed leaf and bud color.


Humidity is a primal factor in the later outcome of the weed yields. If you plant your strains indoors, the outdoor humidity plays a significant role in what the humidity levels replicated indoors. In the four phases of the life cycle of the cannabis plant, it can’t get wrong to say that humidity plays a significant role in the four. Now that different strains have different specs and requirements, it is worth familiarizing oneself with specific issues. Let’s see them below.

Controlling humidity levels

Firstly, it is worth mentioning that skyrocketed humidity (above 60%) levels bring in unwanted growth like is the case with mildews and molds. They also inhibit the proper absorption of carbon dioxide, which, in the long run, affects photosynthesis to a greater extent. The right way to start this process is via the usage of a hygrometer/ humidistat. The optimal levels should range anywhere between 40 and 45%. When the humidity levels go below these levels, the plants may end up having lowered transpiration rates. The purpose of a hygrometer is taking note of the humidity levels. When there are any mishaps, the grower can introduce a humidifier. A humidifier helps in controlling the humidity levels to normal when they surpass or go below par.


Ventilation and humidity go in handy in the cannabis context. For instance, increasing the airflow where the plants get planted aids in lowering humidity levels. Conversely, reducing airflow helps in upping humidity levels. Ventilation is among the best techniques to employ when faced with pathogens. Well, cannabis plants, just like many other plants, require fresh air every additional time. At each phase, these plants need super air exchange. Under most circumstances, cannabis plants are grown in outdoor settings rarely require artificial forms of air circulation as air and wind tend to circulate freely. It’s an undeniable fact that ventilation aids in controlling odor in cannabis tents and greenhouses.

Indoor ventilation

You undoubtedly require certain things if at all, you would like adequately ventilated cannabis plants. Such include duct tape, intake fan, and an exhaust fan. An intake fan works fantastically in ensuring that air gets exchanged within a minute and two. You ought to at least ensure that this fan gets placed in the bottom of the tent and connect it to an open place with fresh air. The core function of duct tape is ensuring that the duct system gets held in place to prevent any sorts of mishaps in the quest to ensure efficient flow of air in and outside of the growing tent or greenhouse. An exhaust fan helps in ousting contaminated air. It also aids in ensuring that the plants won’t suffer from windburn arising from excessive air allowed by the intake fan.

In Summary

We ought to mention that not only does temperature, humidity, and ventilation have a fantastic role in growing cannabis, all these factors end up in causing the overall bud potency after harvesting. That said it’s coral to ensure that you subject the plants to the optimal rates given above on this guide. That way, you rest assured of plants free from molds and overdrying, which in the long run translates to highly potent yields

Chapter 11

Nutrients needed for each life phase

Cannabis plants need nutrients

Just like humans, marijuana plants need specific nutrients to live a healthy, fruitful life. Different nutrients help the plant with performing specific tasks like growing roots or buds. When you buy fertilizer you will see on the packaging the N-P-K ratio. These are the macronutrients that stand for nitrogen, phosphorus, and potassium. These are vital in every marijuana plant’s life so that they can flourish. Most organic soil will take care of the micronutrients your plants will need.

N-P-K nutrients

Nitrogen is especially important during the vegetative phase of the plant’s life as it is largely responsible for a plant’s development. It aids in the production of chlorophyll and without it, the plant can’t create food from sunlight.

Phosphorus is a mobile nutrient within all plants including marijuana; it’s truly a primary nutrient for the plant. It helps with cell division, transporting amino acids throughout the plant, new tissue growth, and general health and energy.

Potassium like the other two have several jobs. It helps strengthen the plant’s immune system, it is needed for photosynthesis (how plants create food from sunlight), and potassium assists with osmoregulation. Osmoregulation is how the plant regulates the water in its cells.

Each life phase requires different nutrients

Marijuana plants need different amounts of each of these nutrients during each distinct life phase. Very young marijuana seedlings that have just germinated do not need extra nutrients and giving them fertilizer too soon in life can cause nutrient burn since they are so fragile. You can begin giving your plant low levels of fertilizer when 3-4 sets of true leaves (not including the cotyledons) have grown. A good starter NPK ratio is 11-40-13.

You can begin adding a bit more fertilizer when 6-7 bladed leaves have developed. When your plant is fully in its vegetative phase then it will need plenty of Nitrogen. An NPK ratio of 19-5-20 will provide enough of the right nutrients to support its robust growth during this time.

When your marijuana plant starts the flowering stage it will again need a different ratio of fertilizer. Now your plants have finished building their support scaffolding. Less leaf and stem production will take place and nitrogen stores have been built up, therefore, less Nitrogen needs to be added. Phosphorus should be increased to support the production of buds along with potassium. An NPK ratio of 15-6-30 will provide your plant with the right amount of nutrients.

During the cannabis plant’s late bloom period you should change the NPK ratio to 0-27-27 to support the plant’s bud production. At 10-14 days before harvest, you should flush your plants using a few gallons of pure water with a pH of 6.0 to 6.8.

Every stage of the marijuana plant needs specific nutrients in order to help grow and generate optimal health. If you are not sure of how to obtain correct ratios then buy fertilizers that have different ratios for every stage of your marijuana plant.

Chapter 12

Mildew, pests, and diseases

Nothing is worse than seeing your beautiful, healthy plants that you’ve taken such good care of getting infested by mildew, pests or diseases. Infestations, infections, and pathogens can quickly ruin your harvest since many times it goes unnoticed before it’s too late. It can even cause the hermaphrodite condition in your female plants if they have been stressed due to an attack. Whether you are growing indoors or outdoors, cannabis plants are susceptible to any of these things. However, indoor pests can do more harm very quickly since there are no predators and natural forces to disrupt them. Therefore you should take care of pests as soon as possible when growing indoors. Let’s take a look at some common mildews, pests, and diseases that affect marijuana.

White Powdery Mildew

White Powdery Mildew, a.k.a. White Mold or Oidium is a parasitic fungus (meaning it latches on to other organisms and takes nutrients from them). This mildew is from the erysiphales family and attacks the above-ground parts of the plant.

Unfortunately, these mildew spores get around quite easily being carried around through air ventilation systems, the wind, your pets, even you! The spores stay idle until the environmental factors are perfect for it to start growing.

Once they lay down on their host leaf they will grow rootlets. Warm temperatures and high humidity levels are ideal for the spores to latch on to your plant and start leaching on it. Overcrowding of your cannabis plants can also encourage this mildew to develop. When leaves of one plant are touching another plant’s leaves then it is highly likable to spread fast and easily. This makes it just that much more difficult to get rid of it. Young plants are higher at risk as it attacks them first.

Indoor and outdoor plants are both at risk of being affected by White Mold. It’s easily diagnosed. The first signs of it, before the powder begins to form, are small bumps that can be found on the top side of the infected leaves. After it develops on the leaves it moves inward toward the stems and then to your marijuana buds. Infected buds will smell damp. It will destroy the resin on your bud and make it completely useless and unable to smoke. Trust me, you don’t want to inhale these fungus spores! In the second phase, your marijuana leaves will turn yellow and end up drying out. You need to catch and stop Powdery Mildew before it starts to slow down photosynthesis in your plant causing it to ruin your harvest.

Luckily for all of us, it’s not only easily preventable but also treatable. Of course, it is advisable to take the necessary measures and prevent it from ever affecting your plants instead of having to treat it. When you first start off your plants or transplant them to their final location, give them plenty of room to grow and mature. Don’t let the plants grow to touch each other. You already decrease your chances of dealing with this mildew just by doing that alone.

It’s also important to water your plants at a time that they will be getting at least 5 hours of light afterward. UVC lightening is great to use if you’re growing indoors; it will prevent the mildew spores from going after your prized plants.

Trimming off your fan leaves that don’t get much direct sunlight may prevent mildew from attacking your plant because it takes away an optimal spot for it to land and starts growing rootlets. The added bonus in doing this is that it allows your plant to put for more energy towards its other leaves and growing bud rather than upkeeping leaves that don’t get sunlight.

If you catch it on time, you can get rid of Powdery Mildew. All you really need are some things you probably already have at home. You will need 2 or 3 tablespoons of apple cider vinegar that has 5% acetic acid and a gallon of water. Mix it together and spray it on your plants. You can even do this before you actually have a mildew problem as a way to prevent it. Take care not to use too much vinegar as it can burn plants. If your mildew problem has progressed quite far then using an apple cider vinegar concentration of higher than 5% may be needed.

A mixture of milk and water is another easy way to fight against Powdery Mildew. Weekly spray your plants (when they are going to have light for a few hours) with the mixture of 1 part milk to 9 parts water. The reason why this strange concoction works for mildew is that milk’s protein reacts to sun and light and creates an antiseptic. You can increase the ratio of milk to water, but don’t go overboard as it can have adverse side effects.

If you’re dealing with infected plants, and you’re disposing of leaves or other affected trimmings, be sure to get rid of it in closed plastic bags as the spores can easily escape and manage to find its way to other plants.

Although Powdery Mildew may seem like a big and disgusting problem at first, it’s cheap and easy to fix. Just keep an eye on your plants and make sure to catch it before it spreads!

Spider Mites

Spider Mites can wreak havoc on your cannabis plants. They are a very common pest, especially when growing in soil. Let’s get to know these critters a bit better so you can hopefully prevent them from ever showing up. Spider mites are a disaster wrapped up in a tiny (they’re a mere 1/50th inch) package with eight legs. They’re not actually considered an insect, instead, they’re considered arachnids like spiders and they’re related to ticks and mites. Their oval bodies can be red and brown or yellow and green. Their color is dependant upon the species of spider mite. The two-spotted spider mite will have, obviously, two dark spots on it’s back. Its body is slightly transparent. They get the name “spider mite” from the web that they spin on your plants. Spider mites will creep up on you unnoticed until suddenly you see thousands devouring your plant. This appearing act is no magic trick either.

Their “magic” trick is the life cycle that allows them to reproduce at a bunny-high rate to quickly populate and dominate plants. In just 3 days spider mite eggs hatch. Only 5 days later they have already reached sexual maturity and they are reproducing fast. Millions of eggs are laid within a month and this cycle continues and worsens unless you step in to take control. Females lay their eggs on the underside of leaves. When the eggs hatch it becomes a larva. These larvae have round bodies and at that point only have 3 pairs of legs. After feeding for a couple of days they find a good spot to molt into the first nymphal stage. At this stage of their life, they say no to a driver’s license but celebrate with a fourth pair of legs. After feeding for another couple of days, they go and molt into the second nymph. Then lastly, after feeding again and resting, they molt into the adult stage. After reaching this stage they can live 2 to 4 more weeks.

Because of their life cycles, it’s easy to believe that you killed off all the adult spider mites and fixed your infestation. However, the unmatured spider mites might still be feeding on your cannabis plant awaiting their next stage of life. The life source of the spider mite that drives it to attack your marijuana plant is the chlorophyll. That’s the substance that plants need for photosynthesis. Spider mites use their sharp slender mouthparts to pierce your plant’s outer layer. When all these mites are attacking a leaf it causes a localized collapse of its mesophyll tissue. Only hours after this happening, the leaf or affected area will develop chlorotic spots causing the loss in productivity. Although spider mites can be found in any growing setup, they are most common in soil due to the dead organic matter. Your best setup against spider mites is a hydroponic system. To be successful in eradicating a spider mite infestation, you need to catch the problem early on. They can be difficult to notice at first because they’re so small and it may not be until your plants are covered in webs that you notice what’s happening. Do routine leaf inspections, especially on the underside of the leaf. When they start making colonies you will see fine “spider webs” between your precious leaves.

Look for small specks, sometimes yellow or white, on the leaves; these are the bite marks of the mite. If the infestation is bad then the entire plant will appear sickly and discolored. It will be worth it for you to take all the necessary precautions to avoid spider mites altogether. If you are going to bring new plants into your grow area then quarantine them for at least 2 weeks. Check them regularly, a handheld microscope comes in handy here. Keep your grow area clean; never have old leaves laying around. Let me repeat -keep it clean! It’s good to have fresh air circulating, but if the air is coming from outside then you should use a filter to keep bugs out.

Your room temperature also plays a part. Mites like it quite warm, so keep your room on the cooler side. Organic compost mulch provides beneficial mites that eat spider mites. Ladybugs also eat spider mites. You can buy them if you already have an infestation, but they’re useless in terms of prevention. There are some treatment options available if you need to go into battle with these mites. One fun thing to do is to vacuum those suckers right off the plant. Put the used vacuum bag in your freezer to kill them, then toss them out with the garbage.

You can also spray a mix of water and rubbing alcohol onto the plants. Use at least 40% water in the mix. A mix of 1 tablespoon bleach in a gallon of water sprayed onto the affected areas also work. Do one of these methods for a few days, and switch to another method if you had a bad infestation. Even when you think you’ve killed them all off, do it again a few times to kill the ones that may have just hatched. Spider mites are a nightmare, but if you take the necessary precautions and check regularly you can save your plants and enjoy the crop you work so hard for

Root Aphids

Root Aphids are like a returning thief in the night that continuously steals the life and vigor of your cannabis plant. Since they attack the root, they eat away at your dear plant unbeknownst to you. At first, you may notice some signs like stunted growth and droopy yellow leaves. This may lead you to think you have a nutrient deficiency but you will have to dig a bit deeper to find the true source of your plant’s problem. Where the Root Aphids have chomped on your marijuana roots it leaves the plant susceptible to fungal infections and dead spots.

You will have to inspect your plants closely to see if Root Aphids are your problem. These tiny buggers are only about 1mm small; so you may need to use jeweler’s loupe or magnifying glass to see them. They come in various colors as their colors change depending on what they eat or their maturity. Their colors can range from yellow, red, green, and sometimes black and brown. If you are having a difficult time distinguishing whether or not the bug you’re spotting is a Root Aphid, then look for a white, waxy material on your plant’s roots that the aphids secrete. This is a sure tell sign that they’ve infested your plant.

Root Aphids have pear-shaped bodies and “tail pipes” at the end of their abdomen. At a later life cycle, they can be mistaken for fungus gnats. These adaptable bugs can have varying life cycles. During the growing season, they reproduce asexually. During the wintertime, the female Root Aphids lay their eggs in the soil. During warm months the female will attach the eggs to leaves and stems where the hatchlings will fall to the ground and bore into the root. Once an infestation gets bad enough the night thieves move higher up the stem continuing to steal your plant’s life. Once they have killed off a plant, they will develop wings to find a new plant to attack.

Another tip of how you can detect if your outdoor cannabis plants are under attack by Root Aphids is if you notice a lot of ants around that area. Ants and Aphids have a quid pro quo kind of relationship. Ants will escort Aphids between plants, protecting them from predators. In return, the Aphids secrete a sugary substance that the ants like to feed on.

Most often than not, root aphids come from commercial soil. Therefore, you should only buy clean soil! Growers talk, so before you purchase soil ask around if any brand is being rumored to be infested with Aphids.

Now, if you’ve reached past the point of being able to prevent Root Aphids and they’re already munching away at your crop you should try to kill them with these methods. Beneficial nematodes can work very well to control Root Aphids. You are basically buying microscopic, non-segmented roundworms that kill many pests like Aphids.

You can buy nematodes at many garden centers. Nematodes are a biological and natural way to kill root aphids within a couple of days and they are harmless to people, animals, and plants. Fill up a spray bottle with water and put in the correct amount of nematodes as stated on the nematode package. Water the soil around your cannabis plant and spray the mixture onto the soil around the plant that is infested with the Root Aphids. The nematodes will go into the soil and kill the pests in 24 to 72 hours. This will give you protection for months.

Another great natural insecticide is pyrethrum; it’s made with chrysanthemum flowers. It’s toxic to Root Aphids along with other harmful garden bugs. However, it’s safe to use around people and pets. All you have to do is spray the insecticide on the soil around the infested plant. Water the plant so that the pyrethrum sinks into the soil. Within hours the pests will start to die. Wait for 12 hours until you water the plant again. You can spray your plants with pyrethrum every 2 or 3 weeks.

An infestation of Root Aphids is a horror to have. Preventing them is the best way to go. Keep a neat and tidy grow space and be wary of commercial soils.

Companion Planting for a Natural Pesticide

Often times we hear about the dangers of ingesting pesticides and chemicals. So, the idea of smoking, juicing, baking, or vaping marijuana treated with poisonous substances should also set off red flags. In fact, many chemicals used on marijuana plants are intended only for lawns and other plants that are not meant to be ingested. Because marijuana is usually inhaled instead of eaten, the poisonous chemicals have a more direct route into the lungs and bloodstream. Therefore, you need to always carefully consider what you put on your plant.

Companion planting is a natural and economical way to increase the quality of your cannabis crop and minimize the damage from pests. It is basically just planting beneficial plants close to each other, but not so close that they complete for root space and other resources. Some plants give off chemicals and strong odors that will either deter pests or draw in beneficial predators. Other companion plants can add vital nutrients to the soil that will feed your marijuana plants with the nourishment they need.

Note to those of you with less than cannabis-friendly neighbors- companion planting can also simply be planting large, bushy plants around your precious crop to camouflage it from neighbors that are also considered pests. Care to cook up a killer pasta while growing? Well, start with basil then, because this delicious herb is a wonderful companion plant for cannabis. Its strong scent repels pests like beetles, flies, aphids, and thrips. It has also been suggested that basil increases the oil production and improves the flavor of plants it’s planted nearby. Another herb that is beneficial to marijuana is dill; it has proven beneficial in repelling spider mites. Cilantro also combats spider mites along with potato beetles and aphids. More herbs like oregano and marjoram are not only an asset to your crop but also for that sweet little pasta dish. They can actually be planted close to your cannabis plant as they do not compete for root space. They will attract beneficial insects and they have been known to increase the yield of plants close to them.

Not only your nose and taste buds are being catered to, but there are also some for your eyes as well. The beautiful chrysanthemum flower contains pyrethrin which is a natural insecticide that can kill varieties of harmful insects along with damaging nematodes. Marigold flowers are a great asset as they have a very strong-smelling chemical that they release into the ground. Plants that are nearby will pick up the chemical that insects, like whiteflies, can taste. Other flowers like the foxglove and mullein attract Dicyphus Hesperus insects that eat spider mites, aphids, and whiteflies.

Even when these companion plants don’t necessarily repel all the insects, as a bonus they just might trick the pests into snacking on the companion plant instead of your cannabis crop, So, if you wish to avoid chemicals, consider choosing a buddy plant for your cannabis crop. It will appreciate having a companion on its side fighting the battles of bugs.

Root Rot

Root rot is a plant disease that is commonly caused by a fungus-like organism called Pythium. Although it is most often found in hydroponic systems, it can also affect plants that are in soil or other planting mediums. The same symptoms of root rot caused by overwatering your cannabis plant can be found in root rot caused by Pythium. It will look like your plant has various kinds of nutrient deficiencies on its leaves. In a sense, it does because the roots cannot properly absorb the nutrients it needs even though those nutrients are actually abundant.

The plant will look stunted. Your leaves will become yellow, wilting, and slowly die out. One of the telltale signs of root rot is particularly slimy brown roots instead of the common healthy and firm white or off-white roots. But first and foremost, your number one sign will be the undeniable stench greeting you when you come to check on your plants. Pythium attacks stressed plants first; gaining entry into the plant by damaged plant tissues. Roots with injuries from insects can also provide an entry site for the pathogens through the feeding wounds. Pythium usually attacks the root tips first and then works its way upward in the root system.

Since root rot in hydroponic systems are the most common, let’s discuss how to prevent it happening there. Disinfect all your growing equipment extremely thoroughly before you start growing a new crop every single time. Keep your area clean and free from dead leaves, roots, or other debris to prevent bacteria from growing. Sterilize equipment shared between tanks like pH meters. Use filtered water, or if you’re using well water or untreated water have it checked for microbes. Change your container’s water regularly to prevent stagnant old water from overproducing bacteria. Try to do this about once a week; don’t wait longer than 2 weeks to do it. The abundance of nutrients in the fresh batch of water will keep your plants happy. The water should have a stable pH of between 5.5 and 6.0.

Your reservoir should be around degrees 65-70F (or 18 to 21 celsius) be sure to take notice that submerged pumps will increase the temperature of the water. Cover your reservoir to avoid light getting into it. Also, try to avoid transplanting from the soil into a hydroponic system. Dirt within the roots can be a haven for pathogens, so start with a soil-less medium after germination.

Follow these rules and you might actually stand a chance against having to fight off root rot. If you’re already fighting root rot then I’m sorry to say that in many cases it’s fatal and you’ll have to start a fresh batch. Although if you’ve just noticed that your roots have a mild case of root rot then introduce fungicides created to treat Pythium into your system. There are some other debatable practices that may help you if you are in a root-rot-rut. Some growers have had success with using hydrogen peroxide, others say it’s only a temporary solution and they prefer other store-bought root treatments. If you want to try the Hydrogen Peroxide treatment then take your plant out of the system and cut off damaged roots. Soak the roots in a container with a strong Hydrogen Peroxide solution repeatedly until the diseased parts have come off. You must sterilize your equipment before putting your plants back.

Your pots, hoses, reservoir, and everything else needs to be sterilized with bleach or a strong peroxide solution and rinsed really well. When you are ready to put the plants back add an anti-Pythium and fresh nutrients to your reservoir. Keep your temperature on the low side and keep an eye on the plant for the next week to see if it’s growing new beautiful white and firm roots. If your cannabis plants are just not making a comeback then it’s time to say goodbye and learn from your mistakes. Remove all the affected plants; do not compost them as the Pythium microbes will continue to live in the roots of the infected plants.

Again, profusely sterilize the equipment, get rid of all the contaminated water, and don’t look back! Start afresh, you can do it, the next batch will be well worth it.

Chapter 13

Growing hydroponically

Hydroponics can look intimidating to the novice grower; like a scientist’s laboratory or something out of a sci-fi movie. However, the benefits of growing hydroponically should be considered when making the decision of how to grow your plants.

What is hydroponic growing

The word “hydroponic” comes from the Greek words ‘hydro’ meaning water and ‘ponos’ meaning labor. It’s a system of growing plants in a nutrient solution made up of water and fertilizer. I don’t mean you stick your plant in a flower vase and expect it to be a hydroponic plant; it’s a bit more complicated than that. It may either be with or without artificial growing mediums like perlite, gravel, rock wool, sand, or lava rocks to provide mechanical support.

When you provide your marijuana plant with exactly what it needs, when it needs it, and in the right amount it will inevitably grow wonderfully. Soil makes this a harder task as it an ecosystem unto itself. It has to change bacteria, nutrient variety, and pH. Hydroponics makes it easier to take control of all of those things. You’ll need to bring your A-game when growing hydroponics because you are then responsible for providing your plants with all the nutrients they need.

Benefits of growing hydroponically

One of the main differences is that when plants are grown in a hydroponic system, as opposed to soil, the nutrients are placed in the water to feed the plant’s roots directly. This is why hydroponic systems produce crops that grow at a faster rate and produce greater yields. In fact, a hydroponic plant grows 30%-50% faster than a plant growing in soil when they’re grown under the same conditions. The plant’s roots don’t have to search for nutrients in the soil. Instead, all of that extra energy can go to bud production.

Because hydroponics are soilless, the plants are less likely to suffer from soil-born diseases, pests, and weeds. If a problem does occur it can be corrected more quickly when compared to growing in soil. Once a hydroponic system is set up and running it can be automated so that it takes minimum effort to maintain.

Disadvantages of hydroponic growing

With so many major advantages there are of course a few disadvantages as well. One of the advantages of hydroponics can also be a disadvantage. Because you are solely responsible for the nutrients the plants receive, you need to be well knowledgeable of the correct nutrients and amount needed to keep your plants growing. There is no room for error in this due to the fact that the roots absorb the nutrients you give them directly. A nutrient mistake will show immediately. Not only will the mistake show, but problems can overtake plants more quickly since they often all share a reservoir.

The pH in hydroponic systems easily fluctuates so you will need to keep an extra eye on that. Another con that soil growers like to claim is that hydro grown cannabis doesn’t taste as good as when it’s grown in nature. Overall, growing hydroponically may not be the easiest for beginners to take on; it takes more knowledge than growing in soil.

Deep Water Culture

For those of you just starting off in the wonderful world of hydroponics, a Deep Water Culture system may be the easiest and cheapest way to go. The idea is that you’re growing your plants in aerated water. All that is needed is a container, lid, pump and net pot. In the container you will put your nutrient solution; normally about 3-4 gallons. The lid will support a single plant that is put in a net pot. The roots will grow out of the net pot down into the nutrient solution. Put an airstone in the container to keep bubbling the water to increase oxygen levels. An airstone is crucial to this system as stagnant water can cause root rot and is the perfect breeding ground for parasites. Every container must also be airtight in order to prevent algae from growing.

Ebb and Flow/Flood and Drain

One of the most popular hydroponic systems is the Ebb and Flow/Flood and Drain. For this setup you will need flood tables, pumps to feed the plants water and nutrients, reservoirs, and a growing medium like Rockwool. This method includes soaking the plant’s roots in the nutrient solution for a period of time then draining the solution leaving the roots in the open air. The process is repeated many times a day. Some growers put their pumps on timers for when to flood the tables and then drain the solution into the reservoir again.

Other growers just drain the nutrient solution, wasting it, and putting in new nutrient solution for the following time. The good thing about this system is that that the water doesn’t become stagnant long enough for parasite infestations or root rot to occur. Hydroponic systems are a great way to expand your horizons as a grower. You will be impressed with your garden after seeing the difference from growing in soil to grow hydroponically. If you do decide to give it a try then make sure you are financially capable of covering the costs and you are confident in the knowledge you have of growing hydroponically.

Chapter 14

Pruning, Topping, Super-Cropping


There is very little we growers won’t do to ensure that we get the best yields when harvesting our crops. Although pruning sounds like something that happens to our fingers when we stay in the water for too long, it is, in, a very good way to boost up your yields. Pruning basically means manipulating your marijuana plant by cutting, bending, or tieing, it to grow a specific way that will give you more and better buds.

Indoors pruning should take place between 10 and 15 days before you force flowering. If you are growing outdoors, then you should start pruning a few weeks before you expect your plant to start flowering. Tall plants can waste a lot of nutrients and energy supplying water throughout a long stem. Instead of your plant wasting so much energy growing a long flimsy stalk, it could have put more energy into growing you a big fat bud. Don’t start just whacking off leaves and branches!

These kinds of things need to be carefully planned out. You’re going to want to prune to stimulate branching since the ends of the branches are where the largest buds grow. Prune to avoid having tall and lanky marijuana plants using the topping method. Not only does it increase yields but it decreases your plant’s height to make for a stronger and sturdier stem.


The topping method is cutting off the top shoot. Let your plant grow to at least 5 nodes and cut the stem just above the second true node. The node where the cotyledons (the first two baby leave) attach does not count as a true node. Don’t rush to prune your plant with this method as the longer you wait the more quickly your plant will be able to recover due to its larger photosynthesis area. I know it seems counter-effective to cut the top off of your plant that you are eager to grow, but it will divide its energy to create multiple colas for you.

As new shoots form after the main stem has been topped, you can repeatedly top new shoots as they form. This will turn two new tops into four, and then you can turn four into eight tops. Make sure to allow at least one internode to form with a set of leaves and cut just above that each time.

Once the main stem has been topped it is possible to repeatedly top new shoots as they form. Once the lateral branches are established it is also possible to top these, encouraging an overall bushy structure. Since the branching takes place near the top of the plant the new emerging tops will get all the wonderful light and grow many medium buds.

It is a bad idea to top your plants during the flowering phase. During the flowering phase, a plant completely changes the way it grows and it’s nutrient requirements are also different than before flowering. Topping your plant as its flowering will cause it to stress and it will give you smaller yields. It will force it to put its energy into repair instead of growing great big beautiful buds.

Super cropping

Another pruning technique to increase your yields is called super cropping. Unlike topping, it does not actually include cutting anything off of your plant. It consists of putting your plant through some stress to increase the number of tops. It will push the lower growth higher and wider so that it will flower. Not only can this method be done on almost all plants but it can be done several times during the vegetative process. The nutrients will work twice as hard to produce higher yields in areas that would otherwise not be productive.

The process is really simple without any tools needed. You can start super cropping when your plant is in the third week of its vegetation phase. Choose a point on your plant close to the first and third node sets. Take your thumb and forefinger and squeeze the stem causing it to create a 90-degree angle. The tips should end up folded over. Make sure you don’t actually break the stem off, just create a kink and let it flop over. Soon enough the “kinked” stem will start to heal, and luckily this process doesn’t dramatically slow down the growth of your plant. Breaking the tissue down will cause it to grow back stronger and ultimately end up giving you bigger and more potent yields.

Prune responsibly. Don’t get overzealous and prune too much too fast. Keep in mind that you are putting your plant under some extra stress when you do it and it must spend extra energy to heal itself. It also could make it more susceptible to insects and fungi. So before you start pruning, make sure your plant is in tip-top shape and that it is not already battling pests.

Now go and enjoy watching a forest emerge with your new pruning skills!

Chapter 15


Importance of flushing your plant

Have you ever coughed so hard after taking a hit that you feel like you’re on the verge of bronchitis? Or what about rolled up a doobie and after toking on it realized you have a fertilizer taste in your mouth? This could be because you didn’t flush your plants before harvest.

Flushing your marijuana plant is kind of like giving it detox from all the nutrient salts and nourishing chemicals that may have stored in your cannabis plants’ tissues. Your plant stores these nutrients in their leaves, in case they don’t get fed again for a while. Since we’re all good loving plant parents and without fail (if ur smart that is) continue to feed them, they don’t actually need all the stored up food. This is where our loving care comes in because they can’t get rid of it without us. Your plants growing medium, the soil, needs to get flushed to get rid of the excess nutrient buildup and then and only then will your plant use up the stored nutrients when it’s not fed more incoming nutrients. However important the fertilizers are, as important is it to clean up after a few months of dinner -so to speak. It’s this nutrient buildup is what causes your smoke to be harsh and bad tasting.

After buying some bud you can tell if it’s been flushed or not simply by lighting it up! If the joint is hard to light and the ash is dark it’s probably not been flushed. Your ash should be white-gray and inhaling should be like it’s meant to beMmmm smooth and tasty.

When to flush your plant You’re going to want to wait to start the flushing until it’s the early end of the harvest window; around the time when you can just practically harvest it already. It’s a big mistake to start flushing too early as it stunts the growth because the buds are not getting the right amount of nutrients to develop properly. If it doesn’t get the right amount of nutrients during the most critical parts of the flowering stage then you’re putting the quality and potency at stake. If you’re too hasty with starting the flush, and realize afterward that your plants still need a couple of weeks to mature fully, then you have a situation on your hands. You would have to decide whether to harvest it early, continuing to flush (which can cause nutrient deficiency), or going back to using nutrients.

The entire flushing will take 2 weeks if you want it done thoroughly, but if you don’t think you need to do it for so long, aim for at least 10 days. Let’s first look at flushing when you are using soil as your medium. First off, put your pots in a draining tray to catch the runoff water. You can also place them in a large enough sink if you have it. Then, using pure water with a pH of 6.0 to 6.8 water your plants with a few gallons of water. Use a shop-vac to suck up the water from the draining tray. Avoid letting your plant sit in the runoff water for too long as the nutrients can get leached in again and that will just make the whole process pointless.

Flushing in a hydroponic system The idea stays basically the same if you’re using a hydro setup. Unplug your water pump and drain all the water. After detaching the hoses from the bucket, sterilize your system. Now you can add the water back into the reservoir. Don’t forget that your water should have a pH between 5.5 and 6.5. Now you can reattach the hoses and let the water circulate for 2-3 hours. Next, you should repeat the process of draining your system and adding new water. Allow that water to circulate in your system until the following day. Replace the water again for the 3rd time and keep this water circulating for the next 10-14 days. Keep an eye on your pH throughout the whole thing.

If you go through with flushing your plants before harvest you will certainly thank me; toking on your clean and wonderfully self-grown bud will be smoother than hot butter… Enjoy

Why trimming is important

Harvest time is fast approaching and no one can be happier than the grower that has spent months taking care of his green babies to produce top-shelf bud. However, the job isn’t over yet, another hurdle has to be jumped before reaping the rewards: trimming. Trimming is an important aspect of harvesting because it can make such a great impact on the look, potency, and smoke of the final bud. Well trimmed bud will make buyers excited and it will sell much more quickly because it is aesthetically pleasing and shows off the beauty of the bud. Badly trimmed bud does not give off a good first impression and brings down the entire quality of the bud. Poorly trimmed bud dilutes the overall potency of the flower as the less potent leaves are wrapping around the outside of the bud and smoking it will feel harsher. If you are simply growing a few plants for your own personal use then by all means trim, or don’t trim, to your liking. Although, if you wanted to sell some bud to a local dispensary then you should do a good job of trimming to make sure your bud looks like it belongs on the top shelf.

Trimming methods

There are two methods to choose from when it comes to trimming cannabis. One grower will swear on the one method and another grower will convince you the other method is better. Some growers trim their marijuana before drying and this is called a “wet trim” as the leaves are still wet when the trimming process takes place. The other method is known as a “dry trim”. This is when you trim the leaves after the bud has already dried before you trim off the sugar leaves. It all comes down to personal preference although the wet trim seems to be the most popular method.

For both methods, you will practically need the same equipment: good quality pruning scissors, larger pruning shears, rubbing alcohol (to clean the sticky residue off your scissors), rubber gloves, clean work area, and containers to organize the trimmed buds, untrimmed buds, and sugar leaves or “trim”.

Let’s first talk about a wet trim. The pros of this method are that there is only one round of trimming, so when it dries, the buds can go directly into a jar for curing. You can get a closer trim, fewer trichomes are lost, and some say it is faster.

Wet trimming

To begin your wet trim you will use your large shears to cut the branches off the cannabis plant. You can hang your freshly cut buds on a line so they don’t get squashed in the container near your workstation. You want to first remove the fan leaves starting at the base. The fan leaves will just be normal leaves without trichomes on them. You can save these fan leaves if you grew organically without pesticides and use them for juicing.

After the fan leaves are removed it’s time to get up close and personal and start trimming the smaller sugar leaves with the trichomes on them with your smaller scissors. You should do this over a baking tray or bowl to catch the small leaves and extra trim so that you can save them for making edibles, topicals, or hash. You will cut all around the bud to reveal the cannabis nugget. During this step, you want to pay close attention to how you are sculpting it as this will be the look of your final product.

Now that your final product is revealed you can cut the bud off the stalk and let it dry on a mesh rack or leave it on the branch and hang it to dry. Your drying environment should be dark and have some airflow like from a fan. Avoid direct wind to your buds. You can put a dehumidifier in the room for a nice touch. Keep an eye on your harvest every day. After about 5 to 7 days your harvest will be dry enough for curing.

Dry trimming

The dry trim has a couple of its own pros: it slows down the drying process and the excess leaves protect the cannabis nugget. The process of dry trimming begins the same as the wet trimming so you will cut down the branches and remove the fan leaves. Now you will hang up the branches in a drying space that is dry, dark, and cool with nice airflow. Don’t overcrowd this area as that may cause mold or mildew to grow. After 5 to 7 days you can check to see if they are ready for more trimming by bending the stalk. If the stalk snaps then they are ready for the next step. The leaves have dried and created a shell around the nugget. You should begin trimming the sugar leaves off over a baking tray to sculpt the bud into its final product. The trichomes will be delicate so be careful with every cut. These buds can now be put into a jar for curing.

Now you have a great supply of beautiful nuggets and a stash of trim leftovers to make into edibles or tinctures. Whether you choose to go with a wet trim or a dry trim the most important aspect is doing a good job trimming so that your glorious nuggets will look their best.

Benefits of drying

By the time you are ready to harvest your bud, you have already gone through an incredible journey taking care of your plants in the best way possible by catering to their every need and warding off dangers of pests and diseases. You have raised them well, but you are not done yet. You are still a few steps away from lighting up and reaping the rewards of your crop. Correctly drying your bud is critical and needs to be done correctly to give you the best bang out of each bud.

You can get the most THC-potent smoke if you dry and cure cannabis correctly. If done incorrectly, the potency can largely diminish. The level of THC that the plant can ultimately reach is determined by its genetics, but correctly drying and curing will give you the highest THC levels genetically possible.

How drying increases potency

When marijuana buds are drying, the THC from its non-psychoactive, crude, acidic form gets converted into its psychoactive neutral form. Thus, if you try to smoke weed that hasn’t been dried yet it will not be very potent. Drying converts at least 70% of the newly harvested plant into water vapor among other gases. After hanging the plant to dry, the transport of fluids inside the plant continues although at a slower rate. The tiny openings under the leaves, the stomata, close after harvest and drying slows down because hardly any water vapor escapes. As the plant dries its natural processes come to an end.

How to dry your buds

Although removing leaves and stems during harvest speeds up the drying process, moisture content becomes uneven. Quick-drying methods also trap chlorophylls, starches, and nitrates inside the plant tissue which affects the burn and taste. Drying marijuana slowly is the way to go. This way the moisture evaporates evenly into the air and you get evenly drying buds with minimal THC decomposition. As the pigments break down taste and aroma improve. Slow drying allows enough time for the pigments to deteriorate.

One of the best ways to allow this process to take place is hanging entire plants upside down to dry. Don’t allow the plants to touch each other as this increases the chance of mold forming. The ideal situation to dry your plants is to keep a steady temperature of 65-75 degrees Fahrenheit (18-24 degrees Celsius), and avoid putting fans directly on the plant as that will cause it to dry unevenly. The humidity should be kept between 45% and 55%.

Your drying room should be quite dark as direct sunlight degrades the THC. The drying time of your bud will be dependant on temperature, humidity, and bud density. By the end of a week, you should be able to start curing your buds, but really big and dense buds might take a few days longer. You can tell if your buds are ready to be cured by squeezing the buds to check its moisture content. The bud should be dry but not brittle. Also, check the stem; bend it, if it breaks (not just bends) then it’s ready for curing.

If your stockpile of weed is meager and you’re going to run out of smoke before you think your new harvest will be done (or you’re just dying for a sample) then there are a few things you can do to speed up the process. It will not ensure that your bud has reached its full potential, but I understand your exigency.

You can try to microwave your buds on a plate for 10 seconds at a time. Continue to turn your buds around every time the 10 seconds are over. Repeat it as necessary but it should be done quickly. It’s important to have your microwave on 50% or less- not on “high”. Otherwise, your bud will start to crackle and pop and your whole house will smell terrible.

You’ve been waiting for months for this moment. All your hard work is finally getting paid off; you’re ready to harvest your crop. Harvesting alone won’t do the trick, nor does just drying out your beloved plants. Curing is the way to go to fully enjoy the fruits of your labor. You don’t want mold to stand a chance against ruining your crop, and of course, you want the maximum flavor and potency you can achieve.

Methods for curing

Sure, there are fast ways to cure your buds like using a microwave, but save the microwave for your popcorn as this method using irradiated heat can reduce the quality and potency of the smoke.

The decarboxylation process that turns THCA into THC is what will be taking place as you dry and cure your crop.

My preferred method of drying crops is air drying. I like to hang my buds upside down with a fan in the room circulating the air until they are ready to be cured. Make sure you don’t let them get too dry; you want them to be moist enough to be flexible but still dry so they don’t get moldy.

The next step requires some patience, but you will be rewarded with flavorful tastes and gratifying aromas. The slow cure takes a few weeks. Get out your mason jars and fill it to the top without stuffing it. Put the jars in a dark place that doesn’t get too hot. Every week shake the jars to get the buds moving around and open the jars for half an hour or so. Try your buds at different stages to find out what you like.

Curing your crop is worth the time and effort as your bud will reward you by its taste and potency.


Storing marijuana seeds shouldn’t be a difficult subject matter, yet every toking Tom will tell you their method is the best only to come out with half your seeds ending up unusable. Often times storage methods are not considered serious enough. Yet, when you spend enough dough on your favorite strains, you don’t want any of them ending up barren due to a silly mistake that you’ve made.

Now, I know many of you have never explored using your green thumb to plant anything until you’ve considered growing your own diggity dank nugs, but let’s take it back to 3rd-grade science. We all know that in order for a seed to germinate it needs a few vital things. Like the saying goes “April showers bring May flowers.” It needs moisture, light, and warm temperatures. So, if you want to keep your seeds from germinating avoid all those things. Sounds simple enough, right?

How to store your seeds

So to break it down, you’re going to need an airtight container like a film canister for example.

Then, put a few silica gel beads or rice grains in your container to soak up any accidental moisture. The humidity should be no more than 10%. Put your seeds in a tiny envelope, bag, or ideally vacuum packed and then put it in your airtight container. Make sure to label what’s inside each container with a date on it as well. You don’t want to take your seeds out unless you have to; temperature changes and exposure to light isn’t good for viability in the long run. Now you’re ready to put your babies away for planting next year. Avoid putting them in the fridge door where the temperature tends to vary, better in a back corner somewhere.

I understand that sometimes you live with other people and you don’t want them to get their grubby little fingers on your seeds. If you don’t want to have a mysterious canister in the back of your fridge labeled “Nothing in this cannister is worth dying for” then you can take a riskier option and store your seeds in a closet, under your bed, someplace dark and protected. However, these places may be more susceptible to temperature change and the #1 enemy of seed storage: humidity. In this case, you must be adamant when it comes to moisture control.

Store your seeds properly and you can sleep well at night knowing that next year and maybe a few years after the next you can still enjoy growing your most beloved strain of seeds.

Subscribe to our newsletter for our bonus chapter

Want to know more about growing seeds into healthy plants? We update our Marijuana Grow Guide every week, if you're subscribed you'll be the first to hear about our promotions and grow guide updates.