I have used the same germination method for years and always had almost every seed come up. This time only part of a pack germinated, while other strains in the same order were fine. What should I check?
Customer, 2026
Short answer
Look at the paper or water, the temperature and the water quality first, because those cause most partial failures. Tell support exactly how you germinated, so they can compare it with the batch.
Step by step
- Check how wet the paper, plug or medium is. It should be damp but never soaking, and it must not dry out.
- Check the water. Tap water can carry a lot of chlorine, so use demineralized water instead.
- Check the temperature. Keep it between 20 and 25 °C.
- Check how the seeds were kept before you started: cool, dark and dry, preferably sealed.
- If everything matches the germination guide, write to support with your method, the strain and how many seeds failed.
Check the paper or the glass of water, the temperature and the water.
Jan van Amsterdam, founder of AMS
Common mistakes
- Keeping the paper or medium too wet, which can suffocate the seed. Support names this as the most common cause.
- Using plain tap water for a method that worked for years, even though your local water may have changed.
- Germinating in a spot colder than 20 °C.
- Judging a whole batch by one strain that failed while the others in the same setup came up.
Did this answer your question?